Day 10 - Halfway there!

Day 10: We left off yesterday with getting ready to glue the backs and sides together. This morning we complete that task using a series of special clamps designed to provide pressure directly down on the sides to the top. We also glued the end block in place. This is really starting to look like a guitar!

While waiting for things to dry, I spent some time working on my headstock inlay. Using a itty-bitty jeweler’s saw, I began to cut out this little guy in abalone. This is a couple of hours of work; it will probably take at least that much time, if not more, to finish cutting it.

Although there aren’t pictures (since they wouldn’t look particularly exciting), we spend significant time this afternoon getting the sides and back ready to be glue together. This task isn’t as straightforward as gluing the top on. The top is flat and the corresponding surface of the sides are also flat, so assuming everything is as it should be, they go together relatively easily. The back, on the other hand, is slightly arched in both directions and therefore the sides need to be subtlety contoured to provide a flush fit for gluing. In addition, the neck block and end block, which were originally perfectly rectangular, need to be angled ever so slightly to match the curvature of the of the back. Using planes and massive contoured sanding blocks and a lot of working and checking, we slowly worked to make sure that the backs will fit correctly with the sides. I’m sure I’ll have pictures of the fully glued body tomorrow!

Started working at 8am, got home just before 8pm, with an hour for lunch.